.jpg)
I PIN AND MICRO PIN
We produce Fine I Pins, as shown in the picture above, and it is best suggested to be used in areas where both the ends of the I Pin are visible on the product being tagged, like tagging a pair of socks or attaching a price card on carpet, etc. This type of Fine I Pins works only with free pitch fine tag gun. If you wish to use 3.5mm size or 5mm size of tag pins, we strongly recommend you use with "For I Pin" tag gun needle. Our brand of Arrow i pin, Chokho i pin and TagStar i pin are very pouplar in Asian and European parts of the world, and is also popularly used for whiskering on jeans and creating wash effects on denims..
Fine Microspace Tag Pins come in strips of 100pcs. This works only with free pitch fine tag gun. This not only facilitates higher product tagging with least frequent re-load of tag pin into the tag gun, but also reduces the packing size of the boxes which further helps reduce cost towards freight and packaging.
Standard Microspace Tag Pins come in strips of 100pcs. This works only with free pitch standard tag guns. Do note and remember, Standard pins work only in standard tag guns, and fine pins work only in fine tag guns. Standard tag guns have a thicker needle, and Fine tag guns have a thinner needle. Hole created while tagging on a product using a standard tag gun will be bigger than the hole created while tagging on a product using a fine tag gun.
